BGBE=0, LVWF=0, LVDRE=0, BGBDS=0, LVDSE=0, LVDE=0, LVWIE=0
System Power Management Status and Control 1 Register
| BGBE | Bandgap Buffer Enable 0 (0): Bandgap buffer disabled. 1 (1): Bandgap buffer enabled. |
| BGBDS | Bandgap Buffer Drive Select 0 (0): Bandgap buffer enabled in low drive mode if BGBE = 1. 1 (1): Bandgap buffer enabled in high drive mode if BGBE = 1. |
| LVDE | Low-Voltage Detect Enable 0 (0): LVD logic disabled. 1 (1): LVD logic enabled. |
| LVDSE | Low-Voltage Detect Stop Enable 0 (0): Low-voltage detect disabled during stop mode. 1 (1): Low-voltage detect enabled during stop mode. |
| LVDRE | Low-Voltage Detect Reset Enable 0 (0): LVD events do not generate hardware resets. 1 (1): Force an MCU reset when an enabled low-voltage detect event occurs. |
| LVWIE | Low-Voltage Warning Interrupt Enable 0 (0): Hardware interrupt disabled (use polling). 1 (1): Request a hardware interrupt when LVWF = 1. |
| LVWACK | Low-Voltage Warning Acknowledge |
| LVWF | Low-Voltage Warning Flag 0 (0): Low-voltage warning is not present. 1 (1): Low-voltage warning is present or was present. |